S.NO |
CATEGORY |
OLD FILM TYPE |
NEW NOMENCLATURE |
 |
DATA SHEET |
|
THICKNESS (MICRONS) |
PROPERTIES |
APPLICATION |
REF.NO. QAD UFLI S/07 |
VIEW APPLICATION |
1 |
Flexible Packaging Films |
FP |
|
10, 11, 12, 15, 19, 23, 36, 50 |
Excellent clarity. The film is available in two types, Viz.,
1.Plain (both side untreated (UT)
2.One side Corona treated film (CT),
Corona treatment is available inside or outside of the roll. |
Flexible packaging, specially designed for FFS machines. |
F1/1 |
 |
2 |
|
CLR |
|
12, 23, 36 |
This grade of films are low haze films with high clarity & transparency. They are available in corona treated or untreated form.This film is having all desired properties mention under F-PAP. |
Printing & Lamination, Metallization, Embossing, Holograms |
F2/1 |
3 |
Extra Clear |
XLR |
|
12,23,30,36,50 |
This grade of films are very low haze films with high clarity & transparency. They are available in corona treated or untreated form.This film is having all desired properties mention under F-PAP. |
Printing & Lamination, Metallization, Embossing, Holograms |
F3/1 |
 |
4 |
Coated Films for Conversion (Improved ink adhesion & retort) |
AUU |
|
10, 12, 23 |
This film is having all the desired
properties as mentioned under F-PAP.
The primer coating done on one
side of the film provides excellent
anchorage to wide range of solvent and water based inks & adhesives hence increases the bond strength of laminate and the other side is plain polyster. |
This grade of film is used for flexible
packaging, specially Designed for FFS
machines.The film is suitable for hot fill applications, pasteurization, sterlization or retort. |
F4/1 |
 |
5 |
AUT |
|
10, 12, 23 |
This is similar to F-AUU film with
corona treatment on the other side for
improved bond strength with the other
substrate.The film is recommended for
hot fill applications, pasteurization,
sterilization or retort. |
This grade of film is used for flexible
packaging, specially Designed for FFS
machines.The film is suitable for hot fill applications, pasteurization, sterlization or retort. |
F5/1 |
6 |
FB |
|
10, 12, 23 |
This film is having all the desired
properties as mentioned under F-PAP.
The primer coating done on one
side of the film provides better
anchorage to inks & adhesives and
improves metal adhesion and other side is plain polyster.The film is
suitable for pasteurization applications. |
Flexible printing &
packaging, specially Designed for FFS
machines.The film can be used for hot fill applications. |
F6/1 |
7 |
ATT |
|
9, 10, 12, 23 |
This is similar to F-ATU film with
corona treatment on the other side for
improved bond strength with the other
substrate.The film is suitable for
pasteurization applications. |
Flexible printing & packaging, specially designed for
FFS machines.The film can be used for hot fill applications. |
F7/1 |
8 |
Coated Films for Conversion (Improved ink & metal adhesion) |
FC |
|
10, 12, 23 |
This film is having all the desired
properties as mentioned under F-PAP.
The coating done on one
side of the film provides excellent
anchorage of metal, various inks &
adhesives. |
Flexible printing & packaging, metallizing and designed
for FFS machines.The film is not recommended for hot fill applications, pasteurization, sterilization or retort. |
F8/1 |
 |
9 |
FF |
|
10, 12, 15, 19, 23 |
This is similar to F-CHE film with
corona treatment on the other side for
improved bond strength with the other
substrate. |
Flexible printing & packaging, metallizing and designed
for FFS machines.The film is not recommended for hot fill applications, pasteurization, sterilization or retort. |
F9/1 |
10 |
|
|
10, 12, 23, 36 |
The film is available in one side chemically coated and another side untreated. |
The film is
suitable for hot fill applications such as ketchup, mayonnaise etc. |
24/1 |
11 |
Coated Optically clear Films for Conversion (Improved ink adhesion & retort) |
|
|
12, 23, 36 |
This grade of film having high clarity & transparency. The chemical coating done on one side of the film provides wide range of solvent and water based inks & adhesives & metal. The other side isplain/corona polyster. |
Flexible printing & packaging, metallizing and designed
for FFS machines.The film is not recommended for hot fill applications, pasteurization, sterilization or retort. |
F26/1 |
|
12 |
|
|
12, 23, 36 |
F-CLR-A is having high clarity & transparency with one side primer coated as F-AUU and F-CLR-A1 the same film with other side corona. |
Flexible printing & packaging, Pasteurization, Sterillization and Retort Applications. |
F27/1 |
|
13 |
|
|
12, 23, 36 |
F-CLR-T is having high clarity & transparency with one side primer coated as F-ATU and F-CLR-T1 the same film with other side corona. |
Flexible printing & packaging and also applicable for hot fill applications. |
F28/1 |
|
14 |
Coated Extar clear Films for Conversion (Improved ink adhesion & retort) |
|
|
12, 23, 36 |
This grade of film having ultra high clear appearance.The chemical coating done on one side of the film provides wide range of solvent and water based inks & adhesives & metal.The other side is plain/corona polyster. |
Flexible printing & packaging, metallizing and designed
for FFS machines.The film is not recommended for hot fill applications, pasteurization, sterilization or retort. |
F29/1 |
|
15 |
|
|
12, 23, 36 |
F-XLR-A is having ultra high clear appearance with one side primer coated as F-AUU and F-XLR-A1 the same film with other side corona. |
Flexible printing & packaging, Pasteurization, Sterillization and Retort Applications. |
F30/1 |
16 |
|
|
12, 23, 36 |
F-XLR-T is having ultra high clear appearance with one side primer coated as F-ATU and F-XLR-T1 the same film with other side corona. |
Flexible printing & packaging and also applicable for hot fill applications. |
F31/1 |
17 |
Document Lamination |
FL |
|
10, 11, 12, 15,
19, 23, 36, 50 |
It has balance shrinkage |
This grade of film is used for thermal
lamination such as document
lamination. |
F10/1 |
 |
18 |
Matt film |
FX |
|
12, 19, 23 |
This grade of film contain a special
additive to give matt surface |
Board lamination, thermal lamination,
label & conversion applications |
F11/1 |
 |
19 |
Electrical Grade |
FE |
|
12, 15, 19, 23, 36, 50 |
This grade of film is having excellent
dielectric properties such as high
breakdown voltage, low dielectric Loss
factor & high electrical resistivity. |
This grade of film is used in electrical
insulation such as motor winding,
cable overwraps, leatheroid
lamination, electrical insulation tape. |
F12/1 |
 |
20 |
Adhesive tape film |
FD |
|
19, 23, 36, 50 |
Specially designed to meet Stringent requirement of adhesive coating |
Adhesive tape |
F13/1 |
 |
21 |
Yarn grade |
FY |
|
12, 23 |
This grade of film is having Excellent
clarity, transparency & thermal stability
at elevated temperatures (190°C)
makes this product ideal for metallic
yarn processsing. Because of
excellent clarity & transparency,when
this film is metallized & coated with
colored laquer, it gives good luster to
the end product. |
Metallic yarn (can be directly used for
plain yarn) & also can be used as
synthetic jari (yarn) after metallization
& lacquering. |
F14/1 |
 |
22 |
Hot Stamping Grade |
FH |
|
12, 15, 19, 23, 45, 50, 55 |
This grade of film has excellent
transparency & clarity. It has good
thermal stability at elevated
temperature (190°C) |
This grade of film is ideal as a transfer
foil to transfer the design either on
paper, textiles or plastics. |
F15/1 |
 |
23 |
Lidding film |
FI |
|
12, 23, 36 |
It has Improved tensile strength and elongation properties |
This grade of film is used for Lidding
application in Dairy products |
F16/1 |
 |
24 |
Coated yarn films for Specialized Applications |
CCY |
|
12, 23 |
Specially designed with the feature
that it is primer coated on one side and
corona treated on other side with
improved Shrinkage at elevated
temperature |
This grade of film have
improved shrinkage properties at
elevated temperatures and is suitable for application where exposure with temperature while conversion as yarn. |
F17/1 |
 |
25 |
CHY |
|
12, 23 |
This film is having all the desired
properties as mentioned under F-YRN.
The film is one side chemically
Coated film. |
This grade of film have
improved shrinkage properties at
elevated temperatures and is suitable for application where exposure with temperature while conversion as yarn. |
F18/1 |
26 |
Metallizing grade |
FM |
|
10, 11, 12, 15, 19, 23, 36, 50 |
This is a transparent film with excellent
clarity to give good gloss after
metallization. The film is available in
two types, viz.,
1.Plain (both side untreated (UT)
2.One side Corona treated film (CT),
the metallization on the corona treated
side gives good adhesion. |
This grade of film is used in vacuum
metallization & for further usage in
flexible packaging as a barrier substrate. |
F19/1 |
 |
27 |
Release film |
FR |
|
19, 23, 36, 50 |
This is a transparent film with Excellent release properties |
This grade of film is used in fiberreinforced plastics and Glass reinforced plastics. |
F20/1 |
 |
28 |
Audio Tape grade |
- |
|
11.5 |
It has excellent tensile strength, elongation properties & surface roughness properties. |
Audio tape application |
F21/1 |
 |
29 |
Direct Embossable Film |
- |
|
13 |
The film is designed with a special
surface suitable for direct embossing
without any offline coating and
providing deep & sharp
impression.The film is available with
untreated and corona treated on other
side |
Holographic Packaging,
giftwrap,embossing & hologram |
F22/1 |
 |
30 |
Easy stackable Film |
- |
|
12 |
This grade have special functional surface so as to provides easy stacking of bags and restrict the slipage while stacking. |
This film helps during palletizing, storage and stacking of bags in supermarket. |
F23/1 |
 |
31 |
Heat Seal Film |
- |
|
15, 23, 30, 36 |
This grade of film is a co-extruded polyster film having one side side heat
sealable layer. |
This film is suitable for seal to itself as well as APET/CPET trays.Heat seal side also seals with PVDC and PVC. |
F25/1 |
|
32 |
Post Consumed Recycled film |
- |
|
12, 15, 19, 23, 36 |
This grade of polyester film is manufactured by using the raw material containing 25% to
30% of post consumed recycled PET chips. |
This film is suitable for printing and Lamination. |
F32/1 |
|
33 |
Hard Embossible film |
- |
|
12, 13, 23 |
This film is designed with a special surface suitable for direct embossing without any
offline coating and providing deep & sharp impression. The film is available with untreated and corona treated on other side. |
Holographic Packaging, giftwrap, embossing & hologram. |
F33/1 |
|
|
|
|
